At a glance, Focusrite Scarlett 2i2 is a USB audio interface that you can run one or two XLR microphones on your computer by plugging them. If you are co-hosting a conversation locally or recording solo, this is an ideal option. Similarly, you can pair it with a recording tool online to capture remote conversations. The Focusrite Scarlett Solo comes with a free download of the Focusrite Control software. This software gives you Scarlett Solo's routing and monitoring capabilities in a single, easy-to-use application. The Focusrite Red Plug-In Suite, the Focusrite Scarlett 2i2 Audio Interface, and the Focusrite Ultra 2 UAD-2 Audio Interface are just a The 2i2 4th Gen's main line outputs now offer up to 120db dynamic range, compared to the 3rd generation's 108db. Likewise, the headphone amps also saw improvements. 4th gen can now output up to 115db versus the 3rd gen's 108db. All that to say the 4th generation Scarletts can output audio at higher volumes. The Volt 2 versus the Focusrite Scarlett 2i2. Focusrite's 2i2 product is probably the most popular comparable device. Like the Volt 2, the Scarlett 2i2 has something akin to a "vintage" mode (they call it "air"), and the inputs and specs are pretty much identical. The Motu M2 tends to be slightly pricier (around $200 as of this OBS 26.1.0, Windows 10, Focusrite Scarlett 2i2 3rd gen, connecting a mixing board to the inputs of the Scarlett, also connecting a JVC video camera to the computer through an HDMI to USB adapter and capturing the audio as a back up to the Scarlett. The video camera was using another analog output from the mixing board to its 1/8" microphone jack. Recording in Audacity (Windows) Save as many projects as you like in Pro Tools | First. Select inputs and outputs in Cakewalk by Bandlab Sonar. Set up Pro-tools I/O to correspond with your interface. Setting up a recording channel in Ableton. Setting up a your interface with SoundTrap on Mac and Windows. Setting up JamKazam with a Focusrite Option A: Use the 2i2 for the mic input. I tried using 3.5mm -> TS and 3.5mm -> TRS adapters to put the mic into one of the input jacks, but I don't pick up any signal. The 2i2's manual seems to suggest that I would need to use the XLR input: "Microphones will normally be connected using XLR plugs: instruments and line level signals should be VibRNuh.

what comes with focusrite scarlett 2i2